Package: acl Version: 2.2.49-1.ofns.pp Depends: libacl(>=2.2.49), libacl.so.1()(64bit), libacl.so.1(ACL_1.0)(64bit), libattr.so.1()(64bit), libc.so.6()(64bit), libc.so.6(GLIBC_2.2.5)(64bit) Section: admin Architecture: x86_64 Maintainer: Peter Pramberger MD5Sum: 17007a512a717c567656a712116aafc6 Size: 64292 Filename: acl_2.2.49-1.ofns.pp_x86_64.ipk Source: http://download.savannah.gnu.org/releases/acl/acl-2.2.49.src.tar.gz Description: Utilities for managing access control lists This package contains a set of utilities needed for manipulating access control lists. Package: aespipe Version: 2.4c-1.ofns.pp Depends: /bin/bash, bzip2, gnupg, libc.so.6()(64bit), libc.so.6(GLIBC_2.2.5)(64bit), sharutils Section: misc Architecture: x86_64 Maintainer: Peter Pramberger MD5Sum: 79e3c3459a438896805494cfed17041e Size: 40323 Filename: aespipe_2.4c-1.ofns.pp_x86_64.ipk Source: http://loop-aes.sourceforge.net/aespipe/aespipe-v2.4c.tar.bz2 Description: An AES-encryption tool for tar/cpio Aespipe is an AES-encryption tool, reading from standard input and writing to standard output. It can be used to create and restore encrypted tar or cpio archives and loop-AES compatible encrypted disk images. Package: attr Version: 2.4.44-1.ofns.pp Depends: libattr(>=2.4.44), libattr.so.1()(64bit), libattr.so.1(ATTR_1.0)(64bit), libattr.so.1(ATTR_1.2)(64bit), libc.so.6()(64bit), libc.so.6(GLIBC_2.2.5)(64bit), libc.so.6(GLIBC_2.3)(64bit), libc.so.6(GLIBC_2.3.4)(64bit) Section: admin Architecture: x86_64 Maintainer: Peter Pramberger MD5Sum: 007e03988b2580eab56a58bd369f0339 Size: 34867 Filename: attr_2.4.44-1.ofns.pp_x86_64.ipk Source: http://download.savannah.gnu.org/releases/attr/attr-2.4.44.src.tar.gz Description: Utilities for managing filesystem extended attributes This package contains a set of tools for manipulating extended attributes on filesystem objects, in particular getfattr(1) and setfattr(1). Package: bacula-client Version: 5.0.3-1.ofns.pp Depends: /bin/bash, bacula(>=5.0.3), gdb, libacl.so.1()(64bit), libacl.so.1(ACL_1.0)(64bit), libattr.so.1()(64bit), libattr.so.1(ATTR_1.0)(64bit), libbac-5.0.3.so()(64bit), libbaccfg-5.0.3.so()(64bit), libbacfind-5.0.3.so()(64bit), libbacpy-5.0.3.so()(64bit), libc.so.6()(64bit), libc.so.6(GLIBC_2.2.5)(64bit), libcap.so.2()(64bit), libcrypto.so.0.9.8()(64bit), libdl.so.2()(64bit), libgcc_s.so.1()(64bit), libm.so.6()(64bit), libpthread.so.0()(64bit), libpthread.so.0(GLIBC_2.2.5)(64bit), libpython2.7.so.1.0()(64bit), libresolv.so.2()(64bit), librt.so.1()(64bit), libssl.so.0.9.8()(64bit), libstdc++.so.6()(64bit), libutil.so.1()(64bit), libwrap.so.0()(64bit), libz.so.1()(64bit) Provides: bpipe-fd.so()(64bit) Section: misc Architecture: x86_64 Maintainer: Peter Pramberger MD5Sum: 1e61798e80f920eba8be8ad137f06940 Size: 73213 Filename: bacula-client_5.0.3-1.ofns.pp_x86_64.ipk Description: The Bacula backup client This package contains the Bacula File service (also known as the Client program) which is the software program that is installed on the machine to be backed up. It is specific to the operating system on which it runs and is responsible for providing file attributes and data when requested by the Director. The File services are also responsible for the file system dependent part of restoring the file attributes and data during a recovery operation. Package: bacula-console Version: 5.0.3-1.ofns.pp Depends: bacula(>=5.0.3), libbac-5.0.3.so()(64bit), libbaccfg-5.0.3.so()(64bit), libc.so.6()(64bit), libc.so.6(GLIBC_2.2.5)(64bit), libc.so.6(GLIBC_2.3.4)(64bit), libcap.so.2()(64bit), libcrypto.so.0.9.8()(64bit), libdl.so.2()(64bit), libgcc_s.so.1()(64bit), libhistory.so.6()(64bit), libm.so.6()(64bit), libncurses.so.5()(64bit), libpthread.so.0()(64bit), libpthread.so.0(GLIBC_2.2.5)(64bit), libreadline.so.6()(64bit), libresolv.so.2()(64bit), libssl.so.0.9.8()(64bit), libstdc++.so.6()(64bit), libtinfo.so.5()(64bit), libwrap.so.0()(64bit), libz.so.1()(64bit) Section: admin Architecture: x86_64 Maintainer: Peter Pramberger MD5Sum: a97ccac4f24b9c2a2b01be45ad5a532c Size: 17769 Filename: bacula-console_5.0.3-1.ofns.pp_x86_64.ipk Description: The Bacula command console This package contains the Bacula Console service, which is the program that allows the administrator or user to communicate with the Bacula Director. It provides a text-based console interface. Package: bacula-server-mysql Version: 5.0.3-1.ofns.pp Depends: /bin/bash, /bin/sh, /opt/custom/bin/python, /usr/bin/env, bacula(>=5.0.3), gdb, libacl.so.1()(64bit), libattr.so.1()(64bit), libbac-5.0.3.so()(64bit), libbaccfg-5.0.3.so()(64bit), libbacfind-5.0.3.so()(64bit), libbacpy-5.0.3.so()(64bit), libc.so.6()(64bit), libc.so.6(GLIBC_2.2.5)(64bit), libc.so.6(GLIBC_2.3.4)(64bit), libcap.so.2()(64bit), libcrypt.so.1()(64bit), libcrypto.so.0.9.8()(64bit), libdl.so.2()(64bit), libgcc_s.so.1()(64bit), libm.so.6()(64bit), libmysqlclient_r.so.16()(64bit), libmysqlclient_r.so.16(libmysqlclient_16)(64bit), libnsl.so.1()(64bit), libpthread.so.0()(64bit), libpthread.so.0(GLIBC_2.2.5)(64bit), libpthread.so.0(GLIBC_2.3.2)(64bit), libpython2.7.so.1.0()(64bit), libresolv.so.2()(64bit), librt.so.1()(64bit), libssl.so.0.9.8()(64bit), libstdc++.so.6()(64bit), libstdc++.so.6(CXXABI_1.3)(64bit), libstdc++.so.6(GLIBCXX_3.4)(64bit), libutil.so.1()(64bit), libwrap.so.0()(64bit), libz.so.1()(64bit) Provides: bacula-server, libbacsql-5.0.3.so()(64bit) Conflicts: bacula-server-sqlite bacula-server-postgresql Section: misc Architecture: x86_64 Maintainer: Peter Pramberger MD5Sum: 89e47f8f0cfa7cd3cffa89f89351e864 Size: 1057057 Filename: bacula-server-mysql_5.0.3-1.ofns.pp_x86_64.ipk Description: The Bacula server for MySQL backends This package contains the Bacula server daemons which use MySQL as database backend for the Catalog service. The Bacula Director service is the program that supervises all the backup, restore, verify and archive operations. The system administrator uses the Bacula Director to schedule backups and to recover files. The Director runs as a daemon in the background. The Bacula Storage services consist of the software programs that perform the storage and recovery of the file attributes and data to the physical backup media or volumes. In other words, the Storage daemon is responsible for reading and writing your tapes (or other storage media, e.g. files). It runs as a daemon on the machine that has the backup device (usually a tape drive). Package: bacula-server-postgresql Version: 5.0.3-1.ofns.pp Depends: /bin/bash, /bin/sh, /opt/custom/bin/python, /usr/bin/env, bacula(>=5.0.3), gdb, libacl.so.1()(64bit), libattr.so.1()(64bit), libbac-5.0.3.so()(64bit), libbaccfg-5.0.3.so()(64bit), libbacfind-5.0.3.so()(64bit), libbacpy-5.0.3.so()(64bit), libc.so.6()(64bit), libc.so.6(GLIBC_2.2.5)(64bit), libc.so.6(GLIBC_2.3.4)(64bit), libcap.so.2()(64bit), libcrypt.so.1()(64bit), libcrypto.so.0.9.8()(64bit), libdl.so.2()(64bit), libgcc_s.so.1()(64bit), libm.so.6()(64bit), libpq.so.5()(64bit), libpthread.so.0()(64bit), libpthread.so.0(GLIBC_2.2.5)(64bit), libpthread.so.0(GLIBC_2.3.2)(64bit), libpython2.7.so.1.0()(64bit), libresolv.so.2()(64bit), librt.so.1()(64bit), libssl.so.0.9.8()(64bit), libstdc++.so.6()(64bit), libstdc++.so.6(CXXABI_1.3)(64bit), libstdc++.so.6(GLIBCXX_3.4)(64bit), libutil.so.1()(64bit), libwrap.so.0()(64bit), libz.so.1()(64bit) Provides: bacula-server, libbacsql-5.0.3.so()(64bit) Conflicts: bacula-server-sqlite bacula-server-mysql Section: misc Architecture: x86_64 Maintainer: Peter Pramberger MD5Sum: c51b0aee5bf2f8775df0e7931071a5b3 Size: 1061981 Filename: bacula-server-postgresql_5.0.3-1.ofns.pp_x86_64.ipk Description: The Bacula server for PostgreSQL backends This package contains the Bacula server daemons which use PostgreSQL as a database backend for the Catalog service. The Bacula Director service is the program that supervises all the backup, restore, verify and archive operations. The system administrator uses the Bacula Director to schedule backups and to recover files. The Director runs as a daemon in the background. The Bacula Storage services consist of the software programs that perform the storage and recovery of the file attributes and data to the physical backup media or volumes. In other words, the Storage daemon is responsible for reading and writing your tapes (or other storage media, e.g. files). It runs as a daemon on the machine that has the backup device (usually a tape drive). Package: bacula-server-sqlite Version: 5.0.3-1.ofns.pp Depends: /bin/bash, /bin/sh, /opt/custom/bin/python, /usr/bin/env, bacula(>=5.0.3), gdb, libacl.so.1()(64bit), libattr.so.1()(64bit), libbac-5.0.3.so()(64bit), libbaccfg-5.0.3.so()(64bit), libbacfind-5.0.3.so()(64bit), libbacpy-5.0.3.so()(64bit), libc.so.6()(64bit), libc.so.6(GLIBC_2.2.5)(64bit), libc.so.6(GLIBC_2.3.4)(64bit), libcap.so.2()(64bit), libcrypto.so.0.9.8()(64bit), libdl.so.2()(64bit), libgcc_s.so.1()(64bit), libm.so.6()(64bit), libpthread.so.0()(64bit), libpthread.so.0(GLIBC_2.2.5)(64bit), libpthread.so.0(GLIBC_2.3.2)(64bit), libpython2.7.so.1.0()(64bit), libresolv.so.2()(64bit), librt.so.1()(64bit), libsqlite3.so.0()(64bit), libssl.so.0.9.8()(64bit), libstdc++.so.6()(64bit), libstdc++.so.6(CXXABI_1.3)(64bit), libstdc++.so.6(GLIBCXX_3.4)(64bit), libutil.so.1()(64bit), libwrap.so.0()(64bit), libz.so.1()(64bit) Provides: bacula-server, libbacsql-5.0.3.so()(64bit) Conflicts: bacula-server-mysql bacula-server-postgresql Section: misc Architecture: x86_64 Maintainer: Peter Pramberger MD5Sum: b2dc05a6f680bb1aeb3031266efc98c3 Size: 1056761 Filename: bacula-server-sqlite_5.0.3-1.ofns.pp_x86_64.ipk Description: The Bacula server for SQLite backends This package contains the Bacula server daemons which use SQLite as database backend for the Catalog service. The Bacula Director service is the program that supervises all the backup, restore, verify and archive operations. The system administrator uses the Bacula Director to schedule backups and to recover files. The Director runs as a daemon in the background. The Bacula Storage services consist of the software programs that perform the storage and recovery of the file attributes and data to the physical backup media or volumes. In other words, the Storage daemon is responsible for reading and writing your tapes (or other storage media, e.g. files). It runs as a daemon on the machine that has the backup device (usually a tape drive). Package: bacula Version: 5.0.3-1.ofns.pp Depends: /bin/bash, /bin/sh, libc.so.6()(64bit), libc.so.6(GLIBC_2.2.5)(64bit), libc.so.6(GLIBC_2.3.2)(64bit), libc.so.6(GLIBC_2.3.4)(64bit), libcap.so.2()(64bit), libcrypto.so.0.9.8()(64bit), libdl.so.2()(64bit), libgcc_s.so.1()(64bit), libm.so.6()(64bit), libm.so.6(GLIBC_2.2.5)(64bit), libpthread.so.0()(64bit), libpthread.so.0(GLIBC_2.2.5)(64bit), libpython2.7.so.1.0()(64bit), libresolv.so.2()(64bit), librt.so.1()(64bit), libssl.so.0.9.8()(64bit), libstdc++.so.6()(64bit), libutil.so.1()(64bit), libwrap.so.0()(64bit), libz.so.1()(64bit), openssl Provides: libbac-5.0.3.so()(64bit), libbaccfg-5.0.3.so()(64bit), libbacfind-5.0.3.so()(64bit), libbacpy-5.0.3.so()(64bit) Section: net Architecture: x86_64 Maintainer: Peter Pramberger MD5Sum: 6cd22205ba3639644c7fccc6e6d75172 Size: 625121 Filename: bacula_5.0.3-1.ofns.pp_x86_64.ipk Source: http://prdownloads.sourceforge.net/sourceforge/bacula/bacula-5.0.3.tar.gz Description: Bacula - The Network Backup Solution Bacula is a set of computer programs that permit you to manage backup, recovery and verification of computer data across a network of computers of different kinds. In technical terms, it is a network client/server based backup program. Bacula is relatively easy to use and efficient, while offering many advanced storage management features that make it easy to find and recover lost or damaged files. This package contains common files required for all packages. Package: basesystem Version: 2.3-1.ofns.pp Provides: /bin/ash, /bin/bash, /bin/csh, /bin/env, /bin/gtar, /bin/ksh, /bin/sh, /bin/tar, /bin/tcsh, /usr/bin/env, /usr/bin/gpg, /usr/bin/perl, /usr/bin/perl5.8.7, /usr/bin/python, /usr/bin/python2.4, /usr/bin/zsh, APItest.so()(64bit), ASN.so()(64bit), B.so()(64bit), Base64.so()(64bit), Byte.so()(64bit), ByteLoader.so()(64bit), C.so()(64bit), CN.so()(64bit), Cwd.so()(64bit), DB_File.so()(64bit), DProf.so()(64bit), Dumper.so()(64bit), EBCDIC.so()(64bit), Encode.so()(64bit), Fcntl.so()(64bit), GDBM_File.so()(64bit), Glob.so()(64bit), Hostname.so()(64bit), IO.so()(64bit), JP.so()(64bit), KR.so()(64bit), Langinfo.so()(64bit), MAKEDEV, MD5.so()(64bit), Normalize.so()(64bit), OID.so()(64bit), Opcode.so()(64bit), PHPSerialize, POSIX.so()(64bit), PPPort.so()(64bit), Peek.so()(64bit), PyXML, SDBM_File.so()(64bit), SNMP.so()(64bit), Socket.so()(64bit), Storable.so()(64bit), Symbol.so()(64bit), SysV.so()(64bit), Syslog.so()(64bit), TW.so()(64bit), TrapReceiver.so()(64bit), Typemap.so()(64bit), Unicode.so()(64bit), Util.so()(64bit), acpid, agent.so()(64bit), aic94xx-firmware, aoe6, apr, apr-util, arecacli, ash, aspell, at, attrs.so()(64bit), authconfig, autodir, autofs, bash, bc, beep, bind, bind-utils, binutils, c-client, chkconfig, conary, coreutils, cpio, cracklib, crontabs, curl, cyrus-sasl, ddless, ddsnap, default_store.so()(64bit), dev, device-mapper-multipath, dhclient, diffutils, distcache, distro-conary-config, distro-release, dmidecode, dnspython, drbd, drbdlinks, dst, dvd+rw-tools, e2fsprogs, eject, elinks, encoding.so()(64bit), ethtool, ext2resize, ext3flush, file, filesystem, findutils, gamin, gawk, gdbm, glib, glibc, gnupg, gnutls, gpm, grep, groff, group-core, group-openfiler, grub, gzip, hdparm, heartbeat, hesiod, hotplug, htmlview, httpd, hwdata, info-apache, info-daemon, info-disk, info-emerge, info-floppy, info-haclient, info-hacluster, info-kmem, info-ldap, info-lock, info-lp, info-mail, info-mailnull, info-man, info-nagios, info-nobody, info-ntp, info-nut, info-nutmon, info-ofguest, info-openfiler, info-rpc, info-rpcuser, info-slocate, info-smmsp, info-sshd, info-tty, info-users, info-utmp, info-uucp, info-vcsa, info-wheel, initscripts, iperf, ipmitool, iproute, iptables, iputils, iscsi-scst, iscsi_trgt, jfsutils, kbd, kernel, krb5, krb5-server, krb5-services, krb5-workstation, krbafs, kudzu, ld-linux-x86-64.so.2()(64bit), ld-linux-x86-64.so.2(GLIBC_2.2.5)(64bit), ld-linux-x86-64.so.2(GLIBC_2.3)(64bit), ld-linux-x86-64.so.2(GLIBC_PRIVATE)(64bit), ld-linux.so.2, ld-linux.so.2(GLIBC_2.0), ld-linux.so.2(GLIBC_2.1), ld-linux.so.2(GLIBC_2.3), ld-linux.so.2(GLIBC_PRIVATE), less, lftp, libBrokenLocale.so.1, libBrokenLocale.so.1()(64bit), libBrokenLocale.so.1(GLIBC_2.0), libBrokenLocale.so.1(GLIBC_2.2.5)(64bit), libSegFault.so, libSegFault.so()(64bit), libaio, libaio.so.1()(64bit), libaio.so.1(LIBAIO_0.1)(64bit), libaio.so.1(LIBAIO_0.4)(64bit), libanl.so.1, libanl.so.1()(64bit), libanl.so.1(GLIBC_2.2.3), libanl.so.1(GLIBC_2.2.5)(64bit), libapphb.so.0()(64bit), libapr-1.so.0()(64bit), libaprutil-1.so.0()(64bit), libaspell.so.15()(64bit), libbfd-2.17.50.0.6.so()(64bit), libbind.so.4()(64bit), libbind9.so.30()(64bit), libblkid.so.1()(64bit), libc-client.so.1()(64bit), libc.so.6, libc.so.6()(64bit), libc.so.6(GCC_3.0), libc.so.6(GLIBC_2.0), libc.so.6(GLIBC_2.1), libc.so.6(GLIBC_2.1.1), libc.so.6(GLIBC_2.1.2), libc.so.6(GLIBC_2.1.3), libc.so.6(GLIBC_2.2), libc.so.6(GLIBC_2.2.1), libc.so.6(GLIBC_2.2.2), libc.so.6(GLIBC_2.2.3), libc.so.6(GLIBC_2.2.4), libc.so.6(GLIBC_2.2.5)(64bit), libc.so.6(GLIBC_2.2.6), libc.so.6(GLIBC_2.2.6)(64bit), libc.so.6(GLIBC_2.3), libc.so.6(GLIBC_2.3)(64bit), libc.so.6(GLIBC_2.3.2), libc.so.6(GLIBC_2.3.2)(64bit), libc.so.6(GLIBC_2.3.3), libc.so.6(GLIBC_2.3.3)(64bit), libc.so.6(GLIBC_2.3.4), libc.so.6(GLIBC_2.3.4)(64bit), libc.so.6(GLIBC_PRIVATE), libc.so.6(GLIBC_PRIVATE)(64bit), libccmclient.so.1()(64bit), libcib.so.1()(64bit), libclm.so.1()(64bit), libcom_err.so.2()(64bit), libcrack.so.2()(64bit), libcrmcommon.so.1()(64bit), libcrypt.so.1, libcrypt.so.1()(64bit), libcrypt.so.1(GLIBC_2.0), libcrypt.so.1(GLIBC_2.2.5)(64bit), libcurl.so.3()(64bit), libdevmapper-event-lvm2mirror.so.2.02()(64bit), libdevmapper-event-lvm2mirror.so.2.02(Base)(64bit), libdevmapper-event-lvm2snapshot.so.2.02()(64bit), libdevmapper-event-lvm2snapshot.so.2.02(Base)(64bit), libdevmapper-event.so.1.02()(64bit), libdevmapper-event.so.1.02(Base)(64bit), libdevmapper.so.1.02()(64bit), libdevmapper.so.1.02(Base)(64bit), libdistcache.so.1()(64bit), libdistcacheserver.so.1()(64bit), libdl.so.2, libdl.so.2()(64bit), libdl.so.2(GLIBC_2.0), libdl.so.2(GLIBC_2.1), libdl.so.2(GLIBC_2.2.5)(64bit), libdl.so.2(GLIBC_2.3.3), libdl.so.2(GLIBC_2.3.3)(64bit), libdl.so.2(GLIBC_2.3.4), libdl.so.2(GLIBC_2.3.4)(64bit), libdl.so.2(GLIBC_PRIVATE), libdl.so.2(GLIBC_PRIVATE)(64bit), libdns.so.38()(64bit), libe2p.so.2()(64bit), libecpg.so.5()(64bit), libecpg_compat.so.2()(64bit), libelf, libelf-lgpl, libelf-lgpl.so.0()(64bit), libelf.so.1()(64bit), libelf.so.1(ELFUTILS_1.0)(64bit), libelf.so.1(ELFUTILS_1.1)(64bit), libevent-1.1a.so.1()(64bit), libexslt.so.0()(64bit), libext2fs.so.2()(64bit), libfam.so.0()(64bit), libgamin-1.so.0()(64bit), libgcc, libgcc_s.so.1, libgcc_s.so.1()(64bit), libgcc_s.so.1(GCC_3.0), libgcc_s.so.1(GCC_3.0)(64bit), libgcc_s.so.1(GCC_3.3), libgcc_s.so.1(GCC_3.3)(64bit), libgcc_s.so.1(GCC_3.3.1), libgcc_s.so.1(GCC_3.3.1)(64bit), libgcc_s.so.1(GCC_3.4), libgcc_s.so.1(GCC_3.4)(64bit), libgcc_s.so.1(GCC_3.4.2), libgcc_s.so.1(GCC_3.4.2)(64bit), libgcc_s.so.1(GCC_3.4.4)(64bit), libgcc_s.so.1(GLIBC_2.0), libgcrypt, libgcrypt.so.11()(64bit), libgcrypt.so.11(GCRYPT_1.2)(64bit), libgdbm.so.2()(64bit), libglib-2.0.so.0()(64bit), libgmodule-2.0.so.0()(64bit), libgnutls-extra.so.13()(64bit), libgnutls-extra.so.13(GNUTLS_1_2)(64bit), libgnutls-openssl.so.13()(64bit), libgnutls.so.13()(64bit), libgnutls.so.13(GNUTLS_1_3)(64bit), libgnutlsxx.so.13()(64bit), libgnutlsxx.so.13(GNUTLS_1_5)(64bit), libgobject-2.0.so.0()(64bit), libgpg-error, libgpg-error.so.0()(64bit), libgpm.so.1()(64bit), libgssglue, libgssglue.so.1()(64bit), libgssglue.so.1(HIDDEN)(64bit), libgssglue.so.1(libgssapi_CITI_2)(64bit), libgthread-2.0.so.0()(64bit), libhandle.so.1()(64bit), libhbclient.so.1()(64bit), libhbmgmt.so.0()(64bit), libhbmgmtclient.so.0()(64bit), libhbmgmtcommon.so.0()(64bit), libhbmgmttls.so.0()(64bit), libhesiod.so.0()(64bit), libhistory.so.5()(64bit), libisc.so.36()(64bit), libisccc.so.30()(64bit), libisccfg.so.30()(64bit), libiw.so.27()(64bit), liblber-2.2.so.7()(64bit), libldap-2.2.so.7()(64bit), libldap_r-2.2.so.7()(64bit), liblftp-jobs.so.0()(64bit), liblftp-tasks.so.0()(64bit), liblrm.so.0()(64bit), liblvm2cmd.so.2.02()(64bit), liblvm2cmd.so.2.02(Base)(64bit), liblwres.so.30()(64bit), liblzo2.so.2()(64bit), libm.so.6, libm.so.6()(64bit), libm.so.6(GLIBC_2.0), libm.so.6(GLIBC_2.1), libm.so.6(GLIBC_2.2), libm.so.6(GLIBC_2.2.5)(64bit), libmagic.so.1()(64bit), libmd5.so.0()(64bit), libmemusage.so, libmemusage.so()(64bit), libmp.so.3()(64bit), libmultipath.so()(64bit), libnal.so.1()(64bit), libnet, libnetapi.so.0()(64bit), libnetsnmp.so.15()(64bit), libnetsnmpagent.so.15()(64bit), libnetsnmphelpers.so.15()(64bit), libnetsnmpmibs.so.15()(64bit), libnetsnmptrapd.so.15()(64bit), libnewt.so.0.51()(64bit), libnfsidmap, libnfsidmap.so.0()(64bit), libnsl.so.1, libnsl.so.1()(64bit), libnsl.so.1(GLIBC_2.0), libnsl.so.1(GLIBC_2.1), libnsl.so.1(GLIBC_2.2), libnsl.so.1(GLIBC_2.2.5)(64bit), libnss_compat.so.2, libnss_compat.so.2()(64bit), libnss_compat.so.2(GLIBC_PRIVATE), libnss_compat.so.2(GLIBC_PRIVATE)(64bit), libnss_dns.so.2, libnss_dns.so.2()(64bit), libnss_dns.so.2(GLIBC_PRIVATE), libnss_dns.so.2(GLIBC_PRIVATE)(64bit), libnss_files.so.2, libnss_files.so.2()(64bit), libnss_files.so.2(GLIBC_PRIVATE), libnss_files.so.2(GLIBC_PRIVATE)(64bit), libnss_hesiod.so.2, libnss_hesiod.so.2()(64bit), libnss_hesiod.so.2(GLIBC_PRIVATE), libnss_hesiod.so.2(GLIBC_PRIVATE)(64bit), libnss_ldap-2.3.6.so()(64bit), libnss_nis.so.2, libnss_nis.so.2()(64bit), libnss_nis.so.2(GLIBC_PRIVATE), libnss_nis.so.2(GLIBC_PRIVATE)(64bit), libnss_nisplus.so.2, libnss_nisplus.so.2()(64bit), libnss_nisplus.so.2(GLIBC_PRIVATE), libnss_nisplus.so.2(GLIBC_PRIVATE)(64bit), libnss_winbind.so.2()(64bit), libnss_wins.so.2()(64bit), libopcodes-2.17.50.0.6.so()(64bit), libpam.so.0()(64bit), libpam_misc.so.0()(64bit), libpamc.so.0()(64bit), libparted-1.6.so.12()(64bit), libpcprofile.so, libpcprofile.so()(64bit), libpe_rules.so.2()(64bit), libpe_status.so.2()(64bit), libpengine.so.3()(64bit), libperl.so()(64bit), libpics.so.0()(64bit), libpils.so.1()(64bit), libplumb.so.1()(64bit), libplumbgpl.so.1()(64bit), libpopt.so.0()(64bit), libproc-3.2.7.so()(64bit), libproc-3.2.7.so(_3_2_5)(64bit), libpspell.so.15()(64bit), libpthread.so.0, libpthread.so.0()(64bit), libpthread.so.0(GLIBC_2.0), libpthread.so.0(GLIBC_2.1), libpthread.so.0(GLIBC_2.1.1), libpthread.so.0(GLIBC_2.1.2), libpthread.so.0(GLIBC_2.2), libpthread.so.0(GLIBC_2.2.3), libpthread.so.0(GLIBC_2.2.5)(64bit), libpthread.so.0(GLIBC_2.2.6), libpthread.so.0(GLIBC_2.2.6)(64bit), libpthread.so.0(GLIBC_2.3.2), libpthread.so.0(GLIBC_2.3.2)(64bit), libpthread.so.0(GLIBC_PRIVATE), libpthread.so.0(GLIBC_PRIVATE)(64bit), libpython2.4.so.1.0()(64bit), libreadline.so.5()(64bit), librecoverymgr.so.1()(64bit), libresolv.so.2, libresolv.so.2()(64bit), libresolv.so.2(GLIBC_2.0), libresolv.so.2(GLIBC_2.2), libresolv.so.2(GLIBC_2.2.5)(64bit), libresolv.so.2(GLIBC_2.3.2), libresolv.so.2(GLIBC_2.3.2)(64bit), libresolv.so.2(GLIBC_PRIVATE), libresolv.so.2(GLIBC_PRIVATE)(64bit), librpcsecgss, librpcsecgss.so.3()(64bit), librt.so.1, librt.so.1()(64bit), librt.so.1(GLIBC_2.1), librt.so.1(GLIBC_2.2), librt.so.1(GLIBC_2.2.5)(64bit), librt.so.1(GLIBC_2.3.4), librt.so.1(GLIBC_2.3.4)(64bit), libsasl2.so.2()(64bit), libsensors.so.4()(64bit), libsgutils.so.1()(64bit), libslang-utf8.so.1()(64bit), libslapi-2.2.so.7()(64bit), libsmbclient.so.0()(64bit), libsmbsharemodes.so.0()(64bit), libsnmp.so.15()(64bit), libss.so.2()(64bit), libstdc++, libstdc++.so.6, libstdc++.so.6()(64bit), libstdc++.so.6(CXXABI_1.3), libstdc++.so.6(CXXABI_1.3)(64bit), libstdc++.so.6(GLIBCXX_3.4), libstdc++.so.6(GLIBCXX_3.4)(64bit), libstdc++.so.6(GLIBCXX_3.4.1), libstdc++.so.6(GLIBCXX_3.4.1)(64bit), libstdc++.so.6(GLIBCXX_3.4.2), libstdc++.so.6(GLIBCXX_3.4.2)(64bit), libstdc++.so.6(GLIBCXX_3.4.3), libstdc++.so.6(GLIBCXX_3.4.3)(64bit), libstonith.so.1()(64bit), libstonithd.so.0()(64bit), libsysfs.so.1()(64bit), libtalloc.so.1()(64bit), libtdb.so.1()(64bit), libtermcap, libtermcap.so.2()(64bit), libthread_db.so.1, libthread_db.so.1()(64bit), libthread_db.so.1(GLIBC_2.1.3), libthread_db.so.1(GLIBC_2.2.3), libthread_db.so.1(GLIBC_2.2.5)(64bit), libthread_db.so.1(GLIBC_2.3), libthread_db.so.1(GLIBC_2.3)(64bit), libthread_db.so.1(GLIBC_2.3.3), libthread_db.so.1(GLIBC_2.3.3)(64bit), libtransitioner.so.1()(64bit), libupsclient.so.1()(64bit), libusb, libusb-0.1.so.4()(64bit), libusbpp-0.1.so.4()(64bit), libuser, libuser.so.1()(64bit), libutempter.so.0()(64bit), libutil.so.1, libutil.so.1()(64bit), libutil.so.1(GLIBC_2.0), libutil.so.1(GLIBC_2.2.5)(64bit), libuuid.so.1()(64bit), libvolume_id.so.0()(64bit), libwbclient.so.0()(64bit), libwwwapp.so.0()(64bit), libwwwcache.so.0()(64bit), libwwwcore.so.0()(64bit), libwwwdir.so.0()(64bit), libwwwfile.so.0()(64bit), libwwwftp.so.0()(64bit), libwwwgopher.so.0()(64bit), libwwwhtml.so.0()(64bit), libwwwhttp.so.0()(64bit), libwwwinit.so.0()(64bit), libwwwmime.so.0()(64bit), libwwwmux.so.0()(64bit), libwwwnews.so.0()(64bit), libwwwstream.so.0()(64bit), libwwwtelnet.so.0()(64bit), libwwwtrans.so.0()(64bit), libwwwutils.so.0()(64bit), libwwwxml.so.0()(64bit), libwwwzip.so.0()(64bit), libxml2, libxml2.so.2()(64bit), libxmlparse.so.0()(64bit), libxmltok.so.0()(64bit), libxslt, libxslt.so.1()(64bit), lighttpd, lm_sensors, logrotate, lshw, lsof, lsscsi, lvm2, lzo, m4, mailbase, mailcap, make, man, mdadm, mingetty, mkinitrd, mktemp, mod_auth_pam, mod_ftpd, mod_ssl, module-init-tools, mtx, myri-firmware, nail, nano, net-snmp, net-snmp-client, net-snmp-server, net-tools, newt, nfs-client, nfs-server, nfs-utils, nmap, nscd, nss_ldap, ntp, nut, open-iscsi, openduckbill, openfiler, openldap, openldap-clients, openldap-servers, openssh, openssh-client, openssh-server, pam, pam_krb5, parted, passwd, pciutils, pdksh, perl, perl-AnyDBM_File, perl-Attribute-Handlers, perl-AutoLoader, perl-AutoLoader(5.60), perl-AutoSplit, perl-AutoSplit(1.04), perl-B, perl-B-Asmdata, perl-B-Assembler, perl-B-Bblock, perl-B-Bytecode, perl-B-C, perl-B-C-InitSection, perl-B-C-Section, perl-B-CC, perl-B-Concise, perl-B-Debug, perl-B-Deparse, perl-B-Disassembler, perl-B-Disassembler-BytecodeStream, perl-B-Lint, perl-B-OBJECT, perl-B-Pseudoreg, perl-B-Section, perl-B-Shadow, perl-B-Showlex, perl-B-Stackobj, perl-B-Stash, perl-B-Terse, perl-B-Xref, perl-Benchmark, perl-Benchmark(1.07), perl-ByteLoader, perl-CGI, perl-CGI-Carp, perl-CGI-Cookie, perl-CGI-Fast, perl-CGI-Pretty, perl-CGI-Push, perl-CGI-Util, perl-CGITempFile, perl-CPAN, perl-CPAN-Author, perl-CPAN-Bundle, perl-CPAN-CacheMgr, perl-CPAN-Complete, perl-CPAN-Config, perl-CPAN-Debug, perl-CPAN-Distribution, perl-CPAN-Eval, perl-CPAN-Exception-RecursiveDependency, perl-CPAN-FTP, perl-CPAN-FTP-netrc, perl-CPAN-FirstTime, perl-CPAN-Index, perl-CPAN-InfoObj, perl-CPAN-LWP-UserAgent, perl-CPAN-Mirrored-By, perl-CPAN-Module, perl-CPAN-Nox, perl-CPAN-Queue, perl-CPAN-Shell, perl-CPAN-Tarzip, perl-CPAN-Version, perl-Carp, perl-Class-ISA, perl-Class-Struct, perl-Class-Struct-Tie_ISA, perl-Config, perl-Cwd, perl-Cwd(3.05), perl-DB, perl-DB_File, perl-DB_File(1.811), perl-DB_File-BTREEINFO, perl-DB_File-HASHINFO, perl-DB_File-RECNOINFO, perl-Data-Dumper, perl-Devel-DProf, perl-Devel-PPPort, perl-Devel-Peek, perl-Devel-SelfStubber, perl-Digest, perl-Digest(1.10), perl-Digest-MD5, perl-Digest-base, perl-Digest-file, perl-DirHandle, perl-Dumpvalue, perl-DynaLoader, perl-DynaLoader(1.05), perl-EVERY, perl-EVERY-LAST, perl-Encode, perl-Encode-Alias, perl-Encode-Byte, perl-Encode-CJKConstants, perl-Encode-CN, perl-Encode-CN-HZ, perl-Encode-Config, perl-Encode-EBCDIC, perl-Encode-Encoder, perl-Encode-Encoding, perl-Encode-Guess, perl-Encode-Internal, perl-Encode-JP, perl-Encode-JP-H2Z, perl-Encode-JP-JIS7, perl-Encode-KR, perl-Encode-KR-2022_KR, perl-Encode-MIME-Header, perl-Encode-Symbol, perl-Encode-TW, perl-Encode-UTF_EBCDIC, perl-Encode-Unicode, perl-Encode-Unicode-UTF7, perl-Encode-utf8, perl-English, perl-Env, perl-Env-Array, perl-Env-Array-VMS, perl-Errno, perl-Errno(1.09), perl-Exporter, perl-Exporter-Heavy, perl-ExtUtils-Command, perl-ExtUtils-Command-MM, perl-ExtUtils-Constant, perl-ExtUtils-Constant-Base, perl-ExtUtils-Constant-Utils, perl-ExtUtils-Constant-XS, perl-ExtUtils-Embed, perl-ExtUtils-Install, perl-ExtUtils-Install-Warn, perl-ExtUtils-Installed, perl-ExtUtils-Liblist, perl-ExtUtils-Liblist-Kid, perl-ExtUtils-MM, perl-ExtUtils-MM_Any, perl-ExtUtils-MM_BeOS, perl-ExtUtils-MM_Cygwin, perl-ExtUtils-MM_DOS, perl-ExtUtils-MM_MacOS, perl-ExtUtils-MM_NW5, perl-ExtUtils-MM_OS2, perl-ExtUtils-MM_UWIN, perl-ExtUtils-MM_Unix, perl-ExtUtils-MM_VMS, perl-ExtUtils-MM_Win32, perl-ExtUtils-MM_Win95, perl-ExtUtils-MY, perl-ExtUtils-MakeMaker, perl-ExtUtils-MakeMaker-_version, perl-ExtUtils-MakeMaker-bytes, perl-ExtUtils-MakeMaker-vmsish, perl-ExtUtils-Manifest, perl-ExtUtils-Miniperl, perl-ExtUtils-Mkbootstrap, perl-ExtUtils-Mksymlists, perl-ExtUtils-Packlist, perl-ExtUtils-testlib, perl-Fatal, perl-Fatal(1.03), perl-Fcntl, perl-Fcntl(1.05), perl-Fh, perl-File-Basename, perl-File-CheckTree, perl-File-Compare, perl-File-Copy, perl-File-DosGlob, perl-File-Find, perl-File-Glob, perl-File-Path, perl-File-Spec, perl-File-Spec-Cygwin, perl-File-Spec-Epoc, perl-File-Spec-Functions, perl-File-Spec-Mac, perl-File-Spec-OS2, perl-File-Spec-Unix, perl-File-Spec-VMS, perl-File-Spec-Win32, perl-File-Temp, perl-File-stat, perl-FileCache, perl-FileHandle, perl-FileHandle(2.01), perl-FindBin, perl-FindBin(1.44), perl-GDBM_File, perl-GDBM_File(1.07), perl-Getopt-Long, perl-Getopt-Long-Parser, perl-Getopt-Std, perl-Hash-Util, perl-I18N-Collate, perl-I18N-LangTags, perl-I18N-LangTags-Detect, perl-I18N-LangTags-List, perl-I18N-Langinfo, perl-IO, perl-IO-Dir, perl-IO-File, perl-IO-Handle, perl-IO-Pipe, perl-IO-Pipe-End, perl-IO-Poll, perl-IO-Seekable, perl-IO-Select, perl-IO-Socket, perl-IO-Socket-INET, perl-IO-Socket-UNIX, perl-IPC-Msg, perl-IPC-Msg-stat, perl-IPC-Open2, perl-IPC-Open3, perl-IPC-Semaphore, perl-IPC-Semaphore-stat, perl-IPC-SysV, perl-List-Util, perl-Locale-Constants, perl-Locale-Country, perl-Locale-Currency, perl-Locale-Language, perl-Locale-Maketext, perl-Locale-Maketext-Guts, perl-Locale-Maketext-GutsLoader, perl-Locale-Script, perl-MIME-Base64, perl-MIME-QuotedPrint, perl-MM, perl-MY, perl-Math-BigFloat, perl-Math-BigFloat-Trace, perl-Math-BigInt, perl-Math-BigInt-Calc, perl-Math-BigInt-CalcEmu, perl-Math-BigInt-Trace, perl-Math-BigRat, perl-Math-Complex, perl-Math-Trig, perl-Memoize, perl-Memoize(1.01), perl-Memoize-AnyDBM_File, perl-Memoize-Expire, perl-Memoize-ExpireFile, perl-Memoize-ExpireTest, perl-Memoize-SDBM_File, perl-Memoize-Storable, perl-MultipartBuffer, perl-NEXT, perl-NEXT(0.60), perl-NEXT-ACTUAL, perl-NEXT-ACTUAL-DISTINCT, perl-NEXT-ACTUAL-UNSEEN, perl-NEXT-DISTINCT, perl-NEXT-DISTINCT-ACTUAL, perl-NEXT-UNSEEN, perl-NEXT-UNSEEN-ACTUAL, perl-Net-Cmd, perl-Net-Config, perl-Net-Domain, perl-Net-FTP, perl-Net-FTP-A, perl-Net-FTP-E, perl-Net-FTP-I, perl-Net-FTP-L, perl-Net-FTP-dataconn, perl-Net-NNTP, perl-Net-Netrc, perl-Net-POP3, perl-Net-Ping, perl-Net-SMTP, perl-Net-Time, perl-Net-hostent, perl-Net-netent, perl-Net-protoent, perl-Net-servent, perl-NetSNMP-ASN, perl-NetSNMP-OID, perl-NetSNMP-TrapReceiver, perl-NetSNMP-agent, perl-NetSNMP-agent-Support, perl-NetSNMP-agent-default_store, perl-NetSNMP-agent-netsnmp_request_infoPtr, perl-NetSNMP-default_store, perl-O, perl-Opcode, perl-Opcode(1.05), perl-POSIX, perl-POSIX-SigAction, perl-PerlIO, perl-PerlIO-encoding, perl-PerlIO-scalar, perl-PerlIO-via, perl-PerlIO-via-QuotedPrint, perl-Pod-Cache, perl-Pod-Cache-Item, perl-Pod-Checker, perl-Pod-Find, perl-Pod-Functions, perl-Pod-Html, perl-Pod-Hyperlink, perl-Pod-InputObjects, perl-Pod-InputSource, perl-Pod-InteriorSequence, perl-Pod-LaTeX, perl-Pod-List, perl-Pod-Man, perl-Pod-Paragraph, perl-Pod-ParseLink, perl-Pod-ParseTree, perl-Pod-ParseUtils, perl-Pod-Parser, perl-Pod-Perldoc, perl-Pod-Perldoc-BaseTo, perl-Pod-Perldoc-GetOptsOO, perl-Pod-Perldoc-ToChecker, perl-Pod-Perldoc-ToMan, perl-Pod-Perldoc-ToNroff, perl-Pod-Perldoc-ToPod, perl-Pod-Perldoc-ToRtf, perl-Pod-Perldoc-ToText, perl-Pod-Perldoc-ToTk, perl-Pod-Perldoc-ToXml, perl-Pod-PlainText, perl-Pod-Plainer, perl-Pod-Select, perl-Pod-Text, perl-Pod-Text-Color, perl-Pod-Text-Overstrike, perl-Pod-Text-Termcap, perl-Pod-Usage, perl-SCST-SCST, perl-SDBM_File, perl-SNMP, perl-SNMP-DEBUGGING, perl-SNMP-DEBUG_INTERNALS, perl-SNMP-DUMP_PACKET, perl-SNMP-MIB, perl-SNMP-MIB-MIB_OPTIONS, perl-SNMP-MIB-NODE, perl-SNMP-MIB-REPLACE_NEWER, perl-SNMP-MIB-SAVE_DESCR, perl-SNMP-Session, perl-SNMP-TrapSession, perl-SNMP-VarList, perl-SNMP-Varbind, perl-Safe, perl-Scalar-Util, perl-Search-Dict, perl-SelectSaver, perl-SelfLoader, perl-SelfLoader(1.0904), perl-Shell, perl-Shell(0.6), perl-Socket, perl-Socket(1.77), perl-Storable, perl-Storable(2.13), perl-Switch, perl-Switch(2.10), perl-Symbol, perl-Symbol(1.06), perl-Sys-Hostname, perl-Sys-Syslog, perl-Term-ANSIColor, perl-Term-Cap, perl-Term-Complete, perl-Term-ReadLine, perl-Term-ReadLine-Stub, perl-Term-ReadLine-TermCap, perl-Term-ReadLine-Tk, perl-Test, perl-Test(1.25), perl-Test-Builder, perl-Test-Harness, perl-Test-Harness-Assert, perl-Test-Harness-Iterator, perl-Test-Harness-Iterator-ARRAY, perl-Test-Harness-Iterator-FH, perl-Test-Harness-Point, perl-Test-Harness-Straps, perl-Test-More, perl-Test-Simple, perl-Text-Abbrev, perl-Text-Balanced, perl-Text-Balanced-ErrorMsg, perl-Text-Balanced-Extractor, perl-Text-ParseWords, perl-Text-Soundex, perl-Text-Tabs, perl-Text-Wrap, perl-Thread, perl-Thread(2.00), perl-Thread-Queue, perl-Thread-Semaphore, perl-Tie-Array, perl-Tie-ExtraHash, perl-Tie-File, perl-Tie-File-Cache, perl-Tie-File-Heap, perl-Tie-Handle, perl-Tie-Hash, perl-Tie-Memoize, perl-Tie-RefHash, perl-Tie-RefHash-Nestable, perl-Tie-Scalar, perl-Tie-StdArray, perl-Tie-StdHandle, perl-Tie-StdHash, perl-Tie-StdScalar, perl-Tie-SubstrHash, perl-Time-Local, perl-Time-gmtime, perl-Time-localtime, perl-Time-tm, perl-UNIVERSAL, perl-Unicode-Collate, perl-Unicode-Normalize, perl-Unicode-UCD, perl-User-grent, perl-User-pwent, perl-XS-APItest, perl-XS-Typemap, perl-XSLoader, perl-attributes, perl-attrs, perl-attrs(1.01), perl-autouse, perl-base, perl-base(2.07), perl-bigint, perl-bigint(0.07), perl-bignum, perl-bignum(0.17), perl-bigrat, perl-bigrat(0.08), perl-blib, perl-blib(1.02), perl-bytes, perl-charnames, perl-constant, perl-constant(1.05), perl-diagnostics, perl-encoding, perl-fields, perl-fields(2.03), perl-filetest, perl-if, perl-integer, perl-less, perl-lib, perl-locale, perl-main, perl-open, perl-ops, perl-overload, perl-re, perl-sigtrap, perl-sigtrap(1.02), perl-sort, perl-strict, perl-subs, perl-threads, perl-threads-shared, perl-utf8, perl-utils, perl-vars, perl-vmsish, perl-warnings, perl-warnings-register, php, php-openfiler, php-pam-auth, php-soap, php-xsl, popt, portmap, procmail, procps, proftpd, psmisc, pycrypto, pyinotify, python-rsync, pyyaml, qla-firmware, quota, rcs, re.so()(64bit), reiserfsprogs, rhpl, rootfiles, rsnapshot, rsync, samba, samba-client, samba-server, scalar.so()(64bit), screen, scsidev, scstadmin, sed, sendmail, setup, sg3_utils, shadow, shared.so()(64bit), slang, slocate, smartmontools, star, strace, sudo, sudo_noexec.so()(64bit), sysfsutils, sysklogd, sysstat, system-config-date, system-config-mouse, system-config-securitylevel, sysvinit, tar, tcsh, telnet, termcap, threads.so()(64bit), tmpwatch, traceroute, tzdata, udev, usbutils, usermode, userspace-kernel-firmware, utempter, util-linux-ng, util-linux-ng-extras, vconfig, via.so()(64bit), vim, vim-minimal, vixie-cron, w3c-libwww, wget, which, wireless-tools, xfsdump, xfsprogs, xinetd, yp-tools, ypbind, zsh, zumastor Section: base Architecture: x86_64 Maintainer: Peter Pramberger MD5Sum: 360129dc9c2c775c20335f0e22f79c93 Size: 8040 Filename: basesystem_2.3-1.ofns.pp_x86_64.ipk Source: basesystem.profile Description: The skeleton package which defines the system base Basesystem defines the components of a basic Linux system (for example, the package installation order to use during bootstrapping). Basesystem should be the first package installed on a system, and it should never be removed. Package: bzip2-libs Version: 1.0.6-1.ofns.pp Depends: libc.so.6()(64bit), libc.so.6(GLIBC_2.2.5)(64bit), libc.so.6(GLIBC_2.3)(64bit) Provides: libbz2.so.1.0()(64bit) Section: libs Architecture: x86_64 Maintainer: Peter Pramberger MD5Sum: 83d170895a91d18ce543b0473ae960d1 Size: 27751 Filename: bzip2-libs_1.0.6-1.ofns.pp_x86_64.ipk Description: Libraries for applications using bzip2 Libraries for applications using the bzip2 compression format. Package: bzip2 Version: 1.0.6-1.ofns.pp Depends: /bin/sh, bzip2-libs(>=1.0.6), libbz2.so.1.0()(64bit), libc.so.6()(64bit), libc.so.6(GLIBC_2.2.5)(64bit), libc.so.6(GLIBC_2.3)(64bit) Section: misc Architecture: x86_64 Maintainer: Peter Pramberger MD5Sum: 3ab2d7efdb4a39c4a206b6bd8931db6a Size: 50729 Filename: bzip2_1.0.6-1.ofns.pp_x86_64.ipk Source: http://www.bzip.org/1.0.6/bzip2-1.0.6.tar.gz Description: A file compression utility Bzip2 is a freely available, patent-free, high quality data compressor. It compresses files to within 10 to 15 percent of the capabilities of the best techniques available. However, bzip2 has the added benefit of being approx. two times faster at compression and six times faster at decompression than those techniques. Bzip2 is not the fastest compression utility, but it does strike a balance between speed and compression capability. Package: db4-utils Version: 4.8.30-1.ofns.pp Depends: db4(>=4.8.30), libc.so.6()(64bit), libc.so.6(GLIBC_2.2.5)(64bit), libc.so.6(GLIBC_2.3)(64bit), libdb-4.8.so()(64bit), libpthread.so.0()(64bit), libpthread.so.0(GLIBC_2.2.5)(64bit) Section: admin Architecture: x86_64 Maintainer: Peter Pramberger MD5Sum: d1319dbc973dd8badaed7588fab8fc62 Size: 124816 Filename: db4-utils_4.8.30-1.ofns.pp_x86_64.ipk Description: Command line tools for Berkeley DB This package contains the command line tools for managing Berkeley DB databases. Package: db4 Version: 4.8.30-1.ofns.pp Depends: libc.so.6()(64bit), libc.so.6(GLIBC_2.2.5)(64bit), libc.so.6(GLIBC_2.3)(64bit), libgcc_s.so.1()(64bit), libgcc_s.so.1(GCC_3.0)(64bit), libm.so.6()(64bit), libpthread.so.0()(64bit), libpthread.so.0(GLIBC_2.2.5)(64bit), libpthread.so.0(GLIBC_2.3.2)(64bit), libstdc++.so.6()(64bit), libstdc++.so.6(CXXABI_1.3)(64bit), libstdc++.so.6(GLIBCXX_3.4)(64bit) Provides: libdb-4.8.so()(64bit), libdb_cxx-4.8.so()(64bit), libdb_stl-4.8.so()(64bit) Section: libs Architecture: x86_64 Maintainer: Peter Pramberger MD5Sum: 5c650728a18d3b0e3325219a7e0c66ea Size: 1989055 Filename: db4_4.8.30-1.ofns.pp_x86_64.ipk Source: http://download.oracle.com/berkeley-db/db-4.8.30.tar.gz Description: The Berkeley DB database library for C The Berkeley Database (Berkeley DB) is a programmatic toolkit that provides embedded database support for traditional and client/server applications. The Berkeley DB includes B+tree, Extended Linear Hashing, Fixed and Variable- length record access methods, transactions, locking, logging, shared memory caching, and database recovery. Package: expat Version: 2.0.1-1.ofns.pp Depends: libc.so.6()(64bit), libc.so.6(GLIBC_2.2.5)(64bit) Provides: libexpat.so.1()(64bit) Section: libs Architecture: x86_64 Maintainer: Peter Pramberger MD5Sum: 0c512742ef984acbe073e257ff01dbcb Size: 103688 Filename: expat_2.0.1-1.ofns.pp_x86_64.ipk Source: http://dl.sourceforge.net/sourceforge/expat/expat-2.0.1.tar.gz Description: A XML parsing library Expat is a C library for parsing XML, written by James Clark. It is a stream oriented XML parser. This means that you register handlers with the parser prior to starting the parse. These handlers are called when the parser discovers the associated structures in the document being parsed. A start tag is an example of the kind of structures for which you may register handlers. Package: gdb Version: 7.2-1.ofns.pp Depends: /bin/sh, libc.so.6()(64bit), libc.so.6(GLIBC_2.2.5)(64bit), libc.so.6(GLIBC_2.3)(64bit), libdl.so.2()(64bit), libdl.so.2(GLIBC_2.2.5)(64bit), libm.so.6()(64bit), libm.so.6(GLIBC_2.2.5)(64bit), libncurses.so.5()(64bit), libpthread.so.0()(64bit), libpthread.so.0(GLIBC_2.2.5)(64bit), libpython2.7.so.1.0()(64bit), libreadline.so.6()(64bit), libtinfo.so.5()(64bit), libutil.so.1()(64bit), libz.so.1()(64bit) Provides: /opt/custom/bin/gdb, /opt/custom/bin/gdbserver Section: admin Architecture: x86_64 Maintainer: Peter Pramberger MD5Sum: 3ad44fe66c9dabac6fc56433c8d40441 Size: 5675830 Filename: gdb_7.2-1.ofns.pp_x86_64.ipk Source: ftp://ftp.gnu.org/gnu/gdb/gdb-7.2.tar.bz2 Description: A GNU source-level debugger GDB, the GNU debugger, allows you to debug programs written in C, C++, Java, and other languages, by executing them in a controlled fashion and printing their data. Package: gmp Version: 5.0.1-1.ofns.pp Depends: libc.so.6()(64bit), libc.so.6(GLIBC_2.2.5)(64bit), libc.so.6(GLIBC_2.3)(64bit), libgcc_s.so.1()(64bit), libgcc_s.so.1(GCC_3.0)(64bit), libm.so.6()(64bit), libstdc++.so.6()(64bit), libstdc++.so.6(CXXABI_1.3)(64bit), libstdc++.so.6(GLIBCXX_3.4)(64bit) Provides: libgmp.so.10()(64bit), libgmpxx.so.4()(64bit), libmp.so.3()(64bit) Section: libs Architecture: x86_64 Maintainer: Peter Pramberger MD5Sum: c37507fbd22f038ed2af3785943dfda5 Size: 383706 Filename: gmp_5.0.1-1.ofns.pp_x86_64.ipk Source: ftp://ftp.gnu.org/gnu/gmp/gmp-5.0.1.tar.bz2 Description: A GNU arbitrary precision library GNU MP is a library for arbitrary precision arithmetic, signed integers operations, rational numbers and floating point numbers. It is designed for speed, for both small and very large operands. GNU MP is fast because it uses fullwords as the basic arithmetic type, it uses fast algorithms, it carefully optimizes assembly code for many CPUs' most common inner loops, and it generally emphasizes speed over simplicity/elegance in its operations. Package: ipkg Version: 0.99.163-1.ofns.pp Depends: /bin/sh, libc.so.6()(64bit), libc.so.6(GLIBC_2.2.5)(64bit), libc.so.6(GLIBC_2.3)(64bit), libc.so.6(GLIBC_2.3.4)(64bit), wget Provides: libipkg.so.0()(64bit), update-alternatives Section: base Architecture: x86_64 Maintainer: Peter Pramberger MD5Sum: ed27c331787489d6446f4d7fb7677623 Size: 116693 Filename: ipkg_0.99.163-1.ofns.pp_x86_64.ipk Source: http://www.handhelds.org/download/packages/ipkg/ipkg-0.99.163.tar.gz Description: The Itsy Package Management System iPKG is a very lightweight package management system. It was designed for Linux installations with severe storage limitations such as handheld computers. iPKG is more than just an embedded Linux flash image builder (although it does that fairly well). It also allows for dynamic installation/removal of packages on a running system. Package: libacl Version: 2.2.49-1.ofns.pp Depends: libattr.so.1()(64bit), libattr.so.1(ATTR_1.0)(64bit), libc.so.6()(64bit), libc.so.6(GLIBC_2.2.5)(64bit) Provides: libacl.so.1()(64bit), libacl.so.1(ACL_1.0)(64bit), libacl.so.1(ACL_1.1)(64bit) Section: libs Architecture: x86_64 Maintainer: Peter Pramberger MD5Sum: aed5930e7a6a1e70320ace166844062c Size: 14977 Filename: libacl_2.2.49-1.ofns.pp_x86_64.ipk Description: A dynamic library for access control list support This package contains the libacl.so dynamic library which contains the POSIX 1003.1e draft standard 17 functions for manipulating access control lists. Package: libattr Version: 2.4.44-1.ofns.pp Depends: libc.so.6()(64bit), libc.so.6(GLIBC_2.2.5)(64bit) Provides: libattr.so.1()(64bit), libattr.so.1(ATTR_1.0)(64bit), libattr.so.1(ATTR_1.1)(64bit), libattr.so.1(ATTR_1.2)(64bit) Section: libs Architecture: x86_64 Maintainer: Peter Pramberger MD5Sum: bc1c9f82dbea950343695bf43823b8bf Size: 8165 Filename: libattr_2.4.44-1.ofns.pp_x86_64.ipk Description: A dynamic library for extended attribute support This package contains the libattr.so dynamic library which contains the extended attribute system calls and library functions. Package: libcap Version: 2.20-1.ofns.pp Depends: libc.so.6()(64bit), libc.so.6(GLIBC_2.2.5)(64bit), libc.so.6(GLIBC_2.3)(64bit), libc.so.6(GLIBC_2.3.3)(64bit) Provides: libcap.so.2()(64bit) Section: libs Architecture: x86_64 Maintainer: Peter Pramberger MD5Sum: 7de7d4f18168fd0d7d71123f7a7cdd5a Size: 23612 Filename: libcap_2.20-1.ofns.pp_x86_64.ipk Source: http://www.kernel.org/pub/linux/libs/security/linux-privs/kernel-2.6/libcap-2.20.tar.gz Description: Library for getting and setting POSIX.1e capabilities libcap is a library for getting and setting POSIX.1e (formerly POSIX 6) draft 15 capabilities. Package: libevent Version: 1.4.14b-1.ofns.pp Depends: libc.so.6()(64bit), libc.so.6(GLIBC_2.2.5)(64bit), libc.so.6(GLIBC_2.3)(64bit), libc.so.6(GLIBC_2.3.2)(64bit), libnsl.so.1()(64bit), libresolv.so.2()(64bit), librt.so.1()(64bit), librt.so.1(GLIBC_2.2.5)(64bit) Provides: libevent-1.4.so.2()(64bit), libevent_core-1.4.so.2()(64bit), libevent_extra-1.4.so.2()(64bit) Section: libs Architecture: x86_64 Maintainer: Peter Pramberger MD5Sum: d034a1fd6964a6a03effc3bc3f9271d4 Size: 107443 Filename: libevent_1.4.14b-1.ofns.pp_x86_64.ipk Source: http://monkey.org/~provos/libevent-1.4.14b-stable.tar.gz Description: An event notification library Libevent provides an API to execute a callback function when a specific event occurs on a file descriptor or after a timeout has been reached. Furthermore, it also support callbacks due to signals or regular timeouts. It is meant to replace the event loop found in event driven network servers. Currently, it supports /dev/poll, kqueue, select, poll and epoll. It also has experimental support for real-time signals. Libevent allows for portable application deve- lopment and provides the most scalable event notification mechanism available on an operating system. Package: libtool-ltdl Version: 1.5.26-1.ofns.pp Depends: libc.so.6()(64bit), libc.so.6(GLIBC_2.2.5)(64bit), libc.so.6(GLIBC_2.3)(64bit), libdl.so.2()(64bit), libdl.so.2(GLIBC_2.2.5)(64bit) Provides: libltdl.so.3()(64bit) Section: libs Architecture: x86_64 Maintainer: Peter Pramberger MD5Sum: 8045d09b6cf0dce78a38d4f58d662f45 Size: 24828 Filename: libtool-ltdl_1.5.26-1.ofns.pp_x86_64.ipk Description: The GNU Libtool Dynamic Module Loader This package contains the GNU Libtool Dynamic Module Loader, a library that provides a consistent, portable interface which simplifies the process of using dynamic modules. Package: libtool Version: 1.5.26-1.ofns.pp Depends: /bin/sh Section: admin Architecture: x86_64 Maintainer: Peter Pramberger MD5Sum: 5efd9aa5d2396afca08d734194ca53e0 Size: 719073 Filename: libtool_1.5.26-1.ofns.pp_x86_64.ipk Source: http://ftp.gnu.org/gnu/libtool/libtool-1.5.26.tar.gz Description: The GNU Portable Library Tool GNU Libtool is a set of shell scripts which automatically configure UNIX and UNIX-like systems to generically build shared libraries. Libtool provides a consistent, portable interface which simplifies the process of using shared libraries. Package: mpfr Version: 3.0.0-1.ofns.pp Depends: libc.so.6()(64bit), libc.so.6(GLIBC_2.2.5)(64bit), libc.so.6(GLIBC_2.3)(64bit), libgmp.so.10()(64bit) Provides: libmpfr.so.4()(64bit) Section: libs Architecture: x86_64 Maintainer: Peter Pramberger MD5Sum: 2f9eb492bcd9406828cae2c1430ad903 Size: 490198 Filename: mpfr_3.0.0-1.ofns.pp_x86_64.ipk Source: http://www.mpfr.org/mpfr-current/mpfr-3.0.0.tar.bz2 Description: A library for multiple-precision floating-point computations The MPFR library is a C library for multiple-precision floating-point computations with correct rounding. MPFR is based on the GMP multiple- precision library. Its main goal is to provide a library for multiple- precision floating-point computation which is both efficient and has a well-defined semantics. It copies the good ideas from the ANSI/IEEE-754 standard for double-precision floating-point arithmetic (53-bit mantissa). Package: mysql-server Version: 5.1.56-1.ofns.pp Depends: /bin/bash, /bin/sh, /usr/bin/perl, libc.so.6()(64bit), libc.so.6(GLIBC_2.2.5)(64bit), libc.so.6(GLIBC_2.3)(64bit), libcrypt.so.1()(64bit), libcrypt.so.1(GLIBC_2.2.5)(64bit), libcrypto.so.0.9.8()(64bit), libdl.so.2()(64bit), libdl.so.2(GLIBC_2.2.5)(64bit), libgcc_s.so.1()(64bit), libm.so.6()(64bit), libm.so.6(GLIBC_2.2.5)(64bit), libmysqlclient.so.16()(64bit), libmysqlclient.so.16(libmysqlclient_16)(64bit), libnsl.so.1()(64bit), libpthread.so.0()(64bit), libpthread.so.0(GLIBC_2.2.5)(64bit), libpthread.so.0(GLIBC_2.3.2)(64bit), libssl.so.0.9.8()(64bit), libstdc++.so.6()(64bit), libstdc++.so.6(CXXABI_1.3)(64bit), libstdc++.so.6(GLIBCXX_3.4)(64bit), libwrap.so.0()(64bit), libz.so.1()(64bit), mysql(>=5.1.56), perl-DBD-mysql, perl-DBI, perl-Data-Dumper, perl-File-Basename, perl-File-Copy, perl-File-Path, perl-File-Temp, perl-Getopt-Long, perl-POSIX, perl-Sys-Hostname, perl-strict, perl-vars, tcp-wrappers Provides: ha_example.so.0()(64bit), ha_innodb_plugin.so.0()(64bit), libdaemon_example.so.0()(64bit), mypluglib.so.0()(64bit) Section: misc Architecture: x86_64 Maintainer: Peter Pramberger MD5Sum: e79952956205bcba2c0317f9897a6c2a Size: 8796824 Filename: mysql-server_5.1.56-1.ofns.pp_x86_64.ipk Description: The MySQL server and related files This package contains the MySQL server and accompanying files and directories. Package: mysql Version: 5.1.56-1.ofns.pp Depends: /bin/sh, /usr/bin/perl, libc.so.6()(64bit), libc.so.6(GLIBC_2.2.5)(64bit), libc.so.6(GLIBC_2.3)(64bit), libc.so.6(GLIBC_2.3.4)(64bit), libcrypt.so.1()(64bit), libcrypto.so.0.9.8()(64bit), libgcc_s.so.1()(64bit), libm.so.6()(64bit), libm.so.6(GLIBC_2.2.5)(64bit), libncurses.so.5()(64bit), libnsl.so.1()(64bit), libpthread.so.0()(64bit), libpthread.so.0(GLIBC_2.2.5)(64bit), libpthread.so.0(GLIBC_2.3.2)(64bit), libssl.so.0.9.8()(64bit), libstdc++.so.6()(64bit), libstdc++.so.6(CXXABI_1.3)(64bit), libstdc++.so.6(GLIBCXX_3.4)(64bit), libtinfo.so.5()(64bit), libz.so.1()(64bit), perl-Exporter, perl-Fcntl, perl-File-Temp, perl-Getopt-Long, perl-IPC-Open3, perl-Sys-Hostname Provides: libmysqlclient.so.16()(64bit), libmysqlclient.so.16(libmysqlclient_16)(64bit), libmysqlclient_r.so.16()(64bit), libmysqlclient_r.so.16(libmysqlclient_16)(64bit) Section: libs Architecture: x86_64 Maintainer: Peter Pramberger MD5Sum: 8d5127bb4a916c2fb1bf302f005f70e5 Size: 4971541 Filename: mysql_5.1.56-1.ofns.pp_x86_64.ipk Source: http://downloads.mysql.com/archives/mysql-5.0/mysql-5.1.56.tar.gz Description: The MySQL client programs and shared libraries MySQL is a multi-user and multi-threaded SQL database server. It is a client/ server implementation consisting of a server daemon (mysqld) and many different client programs and libraries. This package contains the MySQL client programs, the client shared libraries, and generic MySQL files. Package: ncurses Version: 5.8-1.ofns.pp Depends: libc.so.6()(64bit), libc.so.6(GLIBC_2.2.5)(64bit), libc.so.6(GLIBC_2.3)(64bit), libc.so.6(GLIBC_2.3.4)(64bit), libgcc_s.so.1()(64bit), libgcc_s.so.1(GCC_3.0)(64bit), libm.so.6()(64bit), libstdc++.so.6()(64bit), libstdc++.so.6(CXXABI_1.3)(64bit), libstdc++.so.6(GLIBCXX_3.4)(64bit) Provides: libform.so.5()(64bit), libmenu.so.5()(64bit), libncurses++.so.5()(64bit), libncurses.so.5()(64bit), libpanel.so.5()(64bit), libtinfo.so.5()(64bit) Section: libs Architecture: x86_64 Maintainer: Peter Pramberger MD5Sum: 3eb72cf3a317ad9d91cf058e12c7504e Size: 893194 Filename: ncurses_5.8-1.ofns.pp_x86_64.ipk Source: ftp://ftp.gnu.org/pub/gnu/ncurses/ncurses-5.8.tar.gz Description: A terminal handling library The curses library routines are a terminal-independent method of updating character screens with reasonable optimization. The ncurses (new curses) library is a freely distributable replacement for the discontinued 4.4 BSD classic curses library. Package: openssl Version: 0.9.8r-1.ofns.pp Depends: /bin/sh, /usr/bin/perl, libc.so.6()(64bit), libc.so.6(GLIBC_2.2.5)(64bit), libc.so.6(GLIBC_2.3)(64bit), libdl.so.2()(64bit), libdl.so.2(GLIBC_2.2.5)(64bit), libz.so.1()(64bit) Provides: lib4758cca.so()(64bit), libaep.so()(64bit), libatalla.so()(64bit), libcapi.so()(64bit), libchil.so()(64bit), libcrypto.so.0.9.8()(64bit), libcswift.so()(64bit), libgmp.so()(64bit), libnuron.so()(64bit), libssl.so.0.9.8()(64bit), libsureware.so()(64bit), libubsec.so()(64bit) Section: libs Architecture: x86_64 Maintainer: Peter Pramberger MD5Sum: 548fc6e3571252af05b084d7b26023c6 Size: 1286381 Filename: openssl_0.9.8r-1.ofns.pp_x86_64.ipk Source: http://www.openssl.org/source/openssl-0.9.8r.tar.gz Description: The OpenSSL toolkit The OpenSSL toolkit provides support for secure communications between machines. It includes a certificate management tool and shared libraries which provide various cryptographic algorithms and protocols. Package: pcre Version: 8.12-1.ofns.pp Depends: libbz2.so.1.0()(64bit), libc.so.6()(64bit), libc.so.6(GLIBC_2.2.5)(64bit), libc.so.6(GLIBC_2.3)(64bit), libgcc_s.so.1()(64bit), libgcc_s.so.1(GCC_3.0)(64bit), libm.so.6()(64bit), libreadline.so.6()(64bit), libstdc++.so.6()(64bit), libstdc++.so.6(CXXABI_1.3)(64bit), libstdc++.so.6(GLIBCXX_3.4)(64bit), libtinfo.so.5()(64bit), libz.so.1()(64bit) Provides: libpcre.so.0()(64bit), libpcrecpp.so.0()(64bit), libpcreposix.so.0()(64bit) Section: libs Architecture: x86_64 Maintainer: Peter Pramberger MD5Sum: 37ea23659f9a444f5e8ab8f8a4f04c3f Size: 246466 Filename: pcre_8.12-1.ofns.pp_x86_64.ipk Source: http://prdownloads.sourceforge.net/sourceforge/pcre/pcre-8.12.tar.bz2 Description: Perl-compatible regular expression library The PCRE library is a set of functions that implement regular expression pattern matching using the same syntax and semantics as Perl 5. PCRE has its own native API, in addition to POSIX compatible wrapper functions. Package: perl-DBD-Pg Version: 2.18.0-1.ofns.pp Depends: /usr/bin/env, libc.so.6()(64bit), libc.so.6(GLIBC_2.2.5)(64bit), libc.so.6(GLIBC_2.3)(64bit), libcrypto.so.0.9.8()(64bit), libm.so.6()(64bit), libm.so.6(GLIBC_2.2.5)(64bit), libpq.so.5()(64bit), libssl.so.0.9.8()(64bit), perl, perl-DBI, perl-DynaLoader, perl-Exporter, perl-strict, perl-vars, perl-version, perl-warnings Provides: Pg.so()(64bit), perl-Bundle-DBD-Pg, perl-DBD-Pg, perl-DBD-Pg-DefaultValue, perl-DBD-Pg-db, perl-DBD-Pg-dr, perl-DBD-Pg-st Section: libs Architecture: x86_64 Maintainer: Peter Pramberger MD5Sum: 4cb595c3c50e737c443b47d48d371353 Size: 219138 Filename: perl-DBD-Pg_2.18.0-1.ofns.pp_x86_64.ipk Source: http://search.cpan.org/CPAN/authors/id/T/TU/TURNSTEP/DBD-Pg-2.18.0.tar.gz Description: A PostgreSQL interface for Perl DBD::Pg is the PostgreSQL driver for the Perl5 Database Interface (DBI). Package: perl-DBD-mysql Version: 4.018-1.ofns.pp Depends: libc.so.6()(64bit), libc.so.6(GLIBC_2.2.5)(64bit), libc.so.6(GLIBC_2.3)(64bit), libcrypt.so.1()(64bit), libcrypto.so.0.9.8()(64bit), libm.so.6()(64bit), libmysqlclient.so.16()(64bit), libmysqlclient.so.16(libmysqlclient_16)(64bit), libnsl.so.1()(64bit), libssl.so.0.9.8()(64bit), libz.so.1()(64bit), perl, perl-Carp, perl-DBI, perl-DBI-Const-GetInfoType, perl-DynaLoader, perl-strict, perl-vars Provides: mysql.so()(64bit), perl-Bundle-DBD-mysql, perl-DBD-mysql, perl-DBD-mysql-GetInfo, perl-DBD-mysql-db, perl-DBD-mysql-dr, perl-DBD-mysql-st Section: libs Architecture: x86_64 Maintainer: Peter Pramberger MD5Sum: e2c54d3413154a576c0321d426fab3ea Size: 133591 Filename: perl-DBD-mysql_4.018-1.ofns.pp_x86_64.ipk Source: http://search.cpan.org/CPAN/authors/id/C/CA/CAPTTOFU/DBD-mysql-4.018.tar.gz Description: A MySQL interface for Perl DBD::mysql is the MySQL driver for the Perl5 Database Interface (DBI). Package: perl-DBI Version: 1.611-1.ofns.pp Depends: /usr/bin/perl, libc.so.6()(64bit), libc.so.6(GLIBC_2.2.5)(64bit), libc.so.6(GLIBC_2.3)(64bit), perl, perl-Carp, perl-Config, perl-Cwd, perl-Data-Dumper, perl-DynaLoader, perl-Exporter, perl-Fcntl, perl-File-Spec, perl-Getopt-Long, perl-IO-File, perl-IO-Select, perl-IPC-Open3, perl-Storable, perl-Symbol, perl-UNIVERSAL, perl-base, perl-constant, perl-strict, perl-utf8, perl-vars, perl-warnings Provides: DBI.so()(64bit), perl-Bundle-DBI, perl-DBD-DBM, perl-DBD-DBM-Statement, perl-DBD-DBM-Table, perl-DBD-DBM-db, perl-DBD-DBM-dr, perl-DBD-DBM-st, perl-DBD-ExampleP, perl-DBD-File, perl-DBD-File-Statement, perl-DBD-File-Table, perl-DBD-File-db, perl-DBD-File-dr, perl-DBD-File-st, perl-DBD-Gofer, perl-DBD-Gofer-Policy-Base, perl-DBD-Gofer-Policy-classic, perl-DBD-Gofer-Policy-pedantic, perl-DBD-Gofer-Policy-rush, perl-DBD-Gofer-Transport-Base, perl-DBD-Gofer-Transport-null, perl-DBD-Gofer-Transport-pipeone, perl-DBD-Gofer-Transport-stream, perl-DBD-NullP, perl-DBD-Sponge, perl-DBDI, perl-DBI, perl-DBI-Const-GetInfo-ANSI, perl-DBI-Const-GetInfo-ODBC, perl-DBI-Const-GetInfoReturn, perl-DBI-Const-GetInfoType, perl-DBI-DBD, perl-DBI-DBD-Metadata, perl-DBI-FAQ, perl-DBI-Gofer-Execute, perl-DBI-Gofer-Request, perl-DBI-Gofer-Response, perl-DBI-Gofer-Serializer-Base, perl-DBI-Gofer-Serializer-DataDumper, perl-DBI-Gofer-Serializer-Storable, perl-DBI-Gofer-Transport-Base, perl-DBI-Gofer-Transport-pipeone, perl-DBI-Gofer-Transport-stream, perl-DBI-Profile, perl-DBI-ProfileData, perl-DBI-ProfileDumper, perl-DBI-ProfileDumper-Apache, perl-DBI-ProfileSubs, perl-DBI-SQL-Nano, perl-DBI-SQL-Nano-Statement_, perl-DBI-SQL-Nano-Table_, perl-DBI-Util-CacheMemory, perl-DBI-Util-_accessor, perl-DBI-common Section: libs Architecture: x86_64 Maintainer: Peter Pramberger MD5Sum: 1f1c4f1fc67fdb77b451ab3256e2d414 Size: 702498 Filename: perl-DBI_1.611-1.ofns.pp_x86_64.ipk Source: http://search.cpan.org/CPAN/authors/id/T/TI/TIMB/DBI-1.611.tar.gz Description: A Database independent interface for Perl The DBI is a database access module for the Perl programming language. It defines a set of methods, variables, and conventions that provide a consistent database interface, independent of the actual database being used. It is a layer of "glue" between an application and one or more database driver modules. Package: perl-version Version: 0.88-1.ofns.pp Depends: libc.so.6()(64bit), libc.so.6(GLIBC_2.2.5)(64bit), perl, perl-strict, perl-vars Provides: perl-version, perl-version(0.88), perl-version-vxs, vxs.so()(64bit) Section: libs Architecture: x86_64 Maintainer: Peter Pramberger MD5Sum: ac90a558533bcee4d44212c614cac29f Size: 64324 Filename: perl-version_0.88-1.ofns.pp_x86_64.ipk Source: http://search.cpan.org/CPAN/authors/id/J/JP/JPEACOCK/version-0.88.tar.gz Description: A Perl extension for Version Objects Version objects were added to Perl in 5.10. This module implements version objects for older versions of Perl and provides the version object API for all versions of Perl. Package: postgresql-contrib Version: 8.4.7-1.ofns.pp Depends: libc.so.6()(64bit), libc.so.6(GLIBC_2.2.5)(64bit), libc.so.6(GLIBC_2.3)(64bit), libcrypt.so.1()(64bit), libcrypt.so.1(GLIBC_2.2.5)(64bit), libcrypto.so.0.9.8()(64bit), libdl.so.2()(64bit), libm.so.6()(64bit), libm.so.6(GLIBC_2.2.5)(64bit), libpq.so.5()(64bit), libreadline.so.6()(64bit), libssl.so.0.9.8()(64bit), libtermcap.so.2()(64bit), libz.so.1()(64bit), postgresql-server(>=8.4.7) Provides: _int.so()(64bit), adminpack.so()(64bit), auto_explain.so()(64bit), autoinc.so()(64bit), btree_gin.so()(64bit), btree_gist.so()(64bit), chkpass.so()(64bit), citext.so()(64bit), cube.so()(64bit), dblink.so()(64bit), dict_int.so()(64bit), dict_xsyn.so()(64bit), earthdistance.so()(64bit), fuzzystrmatch.so()(64bit), hstore.so()(64bit), insert_username.so()(64bit), isn.so()(64bit), lo.so()(64bit), ltree.so()(64bit), moddatetime.so()(64bit), pageinspect.so()(64bit), pg_buffercache.so()(64bit), pg_freespacemap.so()(64bit), pg_stat_statements.so()(64bit), pg_trgm.so()(64bit), pgcrypto.so()(64bit), pgrowlocks.so()(64bit), pgstattuple.so()(64bit), refint.so()(64bit), seg.so()(64bit), sslinfo.so()(64bit), tablefunc.so()(64bit), test_parser.so()(64bit), timetravel.so()(64bit), tsearch2.so()(64bit) Section: misc Architecture: x86_64 Maintainer: Peter Pramberger MD5Sum: 16da8cd539d9079a1255bba611baab20 Size: 378805 Filename: postgresql-contrib_8.4.7-1.ofns.pp_x86_64.ipk Description: Contributed source and binaries distributed with PostgreSQL This package contains user contributed software that are included in the PostgreSQL distribution. Package: postgresql-pl Version: 8.4.7-1.ofns.pp Depends: libc.so.6()(64bit), libc.so.6(GLIBC_2.2.5)(64bit), libc.so.6(GLIBC_2.3)(64bit), libcrypt.so.1()(64bit), libdl.so.2()(64bit), libdl.so.2(GLIBC_2.2.5)(64bit), libm.so.6()(64bit), libnsl.so.1()(64bit), libperl.so()(64bit), libpthread.so.0()(64bit), libpthread.so.0(GLIBC_2.2.5)(64bit), libpython2.7.so.1.0()(64bit), libresolv.so.2()(64bit), libutil.so.1()(64bit), postgresql-server(>=8.4.7) Provides: plperl.so()(64bit), plpython.so()(64bit) Section: libs Architecture: x86_64 Maintainer: Peter Pramberger MD5Sum: 9223d914016a1f16ee6ea90220148e8d Size: 53604 Filename: postgresql-pl_8.4.7-1.ofns.pp_x86_64.ipk Description: The PL procedural languages for PostgreSQL This package contains the PL/Perl and PL/Python procedural languages for the PostgreSQL backend. PL/Pgsql is part of the core server package. Package: postgresql-server Version: 8.4.7-1.ofns.pp Depends: /bin/bash, libc.so.6()(64bit), libc.so.6(GLIBC_2.2.5)(64bit), libc.so.6(GLIBC_2.3)(64bit), libc.so.6(GLIBC_2.3.3)(64bit), libcrypt.so.1()(64bit), libcrypto.so.0.9.8()(64bit), libdl.so.2()(64bit), libdl.so.2(GLIBC_2.2.5)(64bit), libm.so.6()(64bit), libm.so.6(GLIBC_2.2.5)(64bit), libpq.so.5()(64bit), libreadline.so.6()(64bit), libssl.so.0.9.8()(64bit), libtermcap.so.2()(64bit), libz.so.1()(64bit), postgresql(>=8.4.7) Provides: ascii_and_mic.so()(64bit), cyrillic_and_mic.so()(64bit), dict_snowball.so()(64bit), euc_cn_and_mic.so()(64bit), euc_jis_2004_and_shift_jis_2004.so()(64bit), euc_jp_and_sjis.so()(64bit), euc_kr_and_mic.so()(64bit), euc_tw_and_big5.so()(64bit), latin2_and_win1250.so()(64bit), latin_and_mic.so()(64bit), plpgsql.so()(64bit), utf8_and_ascii.so()(64bit), utf8_and_big5.so()(64bit), utf8_and_cyrillic.so()(64bit), utf8_and_euc_cn.so()(64bit), utf8_and_euc_jis_2004.so()(64bit), utf8_and_euc_jp.so()(64bit), utf8_and_euc_kr.so()(64bit), utf8_and_euc_tw.so()(64bit), utf8_and_gb18030.so()(64bit), utf8_and_gbk.so()(64bit), utf8_and_iso8859.so()(64bit), utf8_and_iso8859_1.so()(64bit), utf8_and_johab.so()(64bit), utf8_and_shift_jis_2004.so()(64bit), utf8_and_sjis.so()(64bit), utf8_and_uhc.so()(64bit), utf8_and_win.so()(64bit) Section: misc Architecture: x86_64 Maintainer: Peter Pramberger MD5Sum: 4ede386328e8da85cfc8536882823844 Size: 3661652 Filename: postgresql-server_8.4.7-1.ofns.pp_x86_64.ipk Description: The PostgreSQL server and related files This package contains the PostgreSQL server and accompanying files and directories. Package: postgresql Version: 8.4.7-1.ofns.pp Depends: libc.so.6()(64bit), libc.so.6(GLIBC_2.2.5)(64bit), libc.so.6(GLIBC_2.3)(64bit), libc.so.6(GLIBC_2.3.3)(64bit), libcrypt.so.1()(64bit), libcrypto.so.0.9.8()(64bit), libdl.so.2()(64bit), libm.so.6()(64bit), libm.so.6(GLIBC_2.2.5)(64bit), libpthread.so.0()(64bit), libpthread.so.0(GLIBC_2.2.5)(64bit), libreadline.so.6()(64bit), libssl.so.0.9.8()(64bit), libtermcap.so.2()(64bit), libz.so.1()(64bit) Provides: libecpg.so.6()(64bit), libecpg_compat.so.3()(64bit), libpgtypes.so.3()(64bit), libpq.so.5()(64bit) Section: libs Architecture: x86_64 Maintainer: Peter Pramberger MD5Sum: 75fcc2d3f6363e95d6fefdaa60dd151d Size: 1092749 Filename: postgresql_8.4.7-1.ofns.pp_x86_64.ipk Source: ftp://ftp.postgresql.org/postgresql/source/v8.4.7/postgresql-8.4.7.tar.bz2 Description: The PostgreSQL client programs and shared libraries PostgreSQL is an advanced Object-Relational database management system (DBMS) that supports almost all SQL constructs (including transactions, subselects and user-defined types and functions). This package contains client programs and libraries that you'll need to access a PostgreSQL DBMS server. Package: python Version: 2.7.1-1.ofns.pp Depends: /bin/sh, libbz2.so.1.0()(64bit), libc.so.6()(64bit), libc.so.6(GLIBC_2.2.5)(64bit), libc.so.6(GLIBC_2.3)(64bit), libc.so.6(GLIBC_2.3.2)(64bit), libcrypt.so.1()(64bit), libcrypt.so.1(GLIBC_2.2.5)(64bit), libcrypto.so.0.9.8()(64bit), libdb-4.8.so()(64bit), libdl.so.2()(64bit), libdl.so.2(GLIBC_2.2.5)(64bit), libm.so.6()(64bit), libm.so.6(GLIBC_2.2.5)(64bit), libncurses.so.5()(64bit), libnsl.so.1()(64bit), libnsl.so.1(GLIBC_2.2.5)(64bit), libpanel.so.5()(64bit), libpthread.so.0()(64bit), libpthread.so.0(GLIBC_2.2.5)(64bit), libreadline.so.6()(64bit), libsqlite3.so.0()(64bit), libssl.so.0.9.8()(64bit), libtinfo.so.5()(64bit), libutil.so.1()(64bit), libutil.so.1(GLIBC_2.2.5)(64bit), libz.so.1()(64bit), libz.so.1(ZLIB_1.2.0)(64bit) Provides: /opt/custom/bin/python, /opt/custom/bin/python2.7, _bisect.so()(64bit), _bsddb.so()(64bit), _codecs_cn.so()(64bit), _codecs_hk.so()(64bit), _codecs_iso2022.so()(64bit), _codecs_jp.so()(64bit), _codecs_kr.so()(64bit), _codecs_tw.so()(64bit), _collections.so()(64bit), _csv.so()(64bit), _ctypes.so()(64bit), _ctypes_test.so()(64bit), _curses_panel.so()(64bit), _cursesmodule.so()(64bit), _elementtree.so()(64bit), _functools.so()(64bit), _hashlib.so()(64bit), _heapq.so()(64bit), _hotshot.so()(64bit), _io.so()(64bit), _json.so()(64bit), _localemodule.so()(64bit), _lsprof.so()(64bit), _multibytecodecmodule.so()(64bit), _multiprocessing.so()(64bit), _random.so()(64bit), _socket.so()(64bit), _sqlite3.so()(64bit), _ssl.so()(64bit), _struct.so()(64bit), _testcapi.so()(64bit), array.so()(64bit), audioop.so()(64bit), binascii.so()(64bit), bz2.so()(64bit), cPickle.so()(64bit), cStringIO.so()(64bit), cmath.so()(64bit), cryptmodule.so()(64bit), datetime.so()(64bit), dbm.so()(64bit), fcntl.so()(64bit), fpectlmodule.so()(64bit), fpetestmodule.so()(64bit), future_builtins.so()(64bit), grp.so()(64bit), itertools.so()(64bit), libpython2.7.so.1.0()(64bit), linuxaudiodev.so()(64bit), math.so()(64bit), mmap.so()(64bit), nismodule.so()(64bit), operator.so()(64bit), ossaudiodev.so()(64bit), parsermodule.so()(64bit), pyexpat.so()(64bit), readline.so()(64bit), resource.so()(64bit), select.so()(64bit), spwd.so()(64bit), strop.so()(64bit), syslogmodule.so()(64bit), termios.so()(64bit), time.so()(64bit), timingmodule.so()(64bit), unicodedata.so()(64bit), zlibmodule.so()(64bit) Section: admin Architecture: x86_64 Maintainer: Peter Pramberger MD5Sum: ccd2fb073502ac775c27e9c731e342a3 Size: 8495837 Filename: python_2.7.1-1.ofns.pp_x86_64.ipk Source: http://www.python.org/ftp/python/2.7.1/Python-2.7.1.tar.bz2 Description: An interpreted, interactive, object-oriented programming language Python is an interpreted, interactive, object-oriented programming language often compared to Tcl, Perl, Scheme or Java. Python includes modules, classes, exceptions, very high level dynamic data types and dynamic typing. Python supports interfaces to many system calls and libraries, as well as to various windowing systems (X11, Motif, Tk, Mac and MFC). Package: readline Version: 6.2-1.ofns.pp Depends: libc.so.6()(64bit), libc.so.6(GLIBC_2.2.5)(64bit), libc.so.6(GLIBC_2.3)(64bit) Provides: libhistory.so.6()(64bit), libreadline.so.6()(64bit) Section: libs Architecture: x86_64 Maintainer: Peter Pramberger MD5Sum: 1a2889640162978be1dcd1b292afee58 Size: 164120 Filename: readline_6.2-1.ofns.pp_x86_64.ipk Source: ftp://ftp.gnu.org/gnu/readline/readline-6.2.tar.gz Description: A library for editing typed command lines The Readline library provides a set of functions that allow users to edit command lines. Both Emacs and vi editing modes are available. The Readline library includes additional functions for maintaining a list of previously- entered command lines for recalling and/or editing those lines, and for performing csh-like history expansion on previous commands. Package: sharutils Version: 4.11-1.ofns.pp Depends: /bin/bash, gzip, libc.so.6()(64bit), libc.so.6(GLIBC_2.2.5)(64bit), libc.so.6(GLIBC_2.3)(64bit), tar Section: admin Architecture: x86_64 Maintainer: Peter Pramberger MD5Sum: c19546efcb258e14ce54805b6943578d Size: 76154 Filename: sharutils_4.11-1.ofns.pp_x86_64.ipk Source: ftp://ftp.gnu.org/gnu/sharutils/REL-4.11/sharutils-4.11.tar.bz2 Description: Utilities for packaging and unpackaging shell archives The sharutils package contains the GNU shar utilities, a set of tools for encoding and decoding packages of files (in binary or text format) in a special plain text format called shell archives (shar). This format can be sent through e-mail (which can be problematic for regular binary files). Package: sqlite Version: 3070500-1.ofns.pp Depends: libc.so.6()(64bit), libc.so.6(GLIBC_2.2.5)(64bit), libc.so.6(GLIBC_2.3)(64bit), libpthread.so.0()(64bit), libpthread.so.0(GLIBC_2.2.5)(64bit), libreadline.so.6()(64bit), libtinfo.so.5()(64bit) Provides: libsqlite3.so.0()(64bit) Section: libs Architecture: x86_64 Maintainer: Peter Pramberger MD5Sum: 4ad2d06e32ca6a8091fc8b88d4fc038c Size: 276051 Filename: sqlite_3070500-1.ofns.pp_x86_64.ipk Source: http://www.sqlite.org/sqlite-src-3070500.zip Description: An embeddable SQL database engine SQLite is a C library that implements an SQL database engine. A large subset of SQL92 is supported. A complete database is stored in a single disk file. The API is designed for convenience and ease of use. Applications that link against SQLite can enjoy the power and flexibility of an SQL database without the administrative hassles of supporting a separate database server. Package: tcp-wrappers Version: 7.6-1.ofns.pp Depends: libc.so.6()(64bit), libc.so.6(GLIBC_2.2.5)(64bit), libc.so.6(GLIBC_2.3)(64bit) Provides: /opt/custom/etc/hosts.allow, /opt/custom/etc/hosts.deny, /opt/custom/sbin/tcpd, libwrap.so.0()(64bit) Section: libs Architecture: x86_64 Maintainer: Peter Pramberger MD5Sum: 0bd3dce8295fbb304a51c21a4d1065e8 Size: 70679 Filename: tcp-wrappers_7.6-1.ofns.pp_x86_64.ipk Source: ftp://ftp.porcupine.org/pub/security/tcp_wrappers_7.6-ipv6.4.tar.gz Description: A security tool which acts as a wrapper for TCP daemons The tcp-wrappers package provides small daemon programs which can monitor and filter incoming requests for systat, finger, FTP, telnet, rlogin, rsh, exec, tftp, talk and other network services. Package: twonkymedia-sup Version: 1.0.1-1.ofns.pp Depends: /bin/bash, unzip Provides: twonkymedia Section: extras Architecture: noarch Maintainer: Peter Pramberger MD5Sum: 8513565d3463e400f8fac0d224b46338 Size: 3184 Filename: twonkymedia-sup_1.0.1-1.ofns.pp_noarch.ipk Source: twonkymedia.init Description: The TwonkyVision Media Server supplement TwonkyMedia is a fast and feature-rich Media Server developed by TwonkyVision, which is available for many different platforms and interworks with a large variety of client devices including XBox 360 and Sony PSP. Due to license restrictions which deny any third-party binary distribution, we can only provide an init script and a install helper script. Use this install script and the downloaded package from the TwonkyVision home page to install TwonkyMedia 4.x on your NAS. Package: unzip Version: 6.10b-1.ofns.pp Depends: /bin/sh, libc.so.6()(64bit), libc.so.6(GLIBC_2.2.5)(64bit), libc.so.6(GLIBC_2.3)(64bit) Section: misc Architecture: x86_64 Maintainer: Peter Pramberger MD5Sum: 0a4f9b00d72d97bf17c9388558c98913 Size: 239187 Filename: unzip_6.10b-1.ofns.pp_x86_64.ipk Source: http://downloads.sourceforge.net/project/infozip/unreleased0Betas/UnZip0betas/unzip610b.zip Description: An utility for unpacking zip files The unzip utility is used to test or extract files from a zip archive. Zip archives are commonly found on MS-DOS systems. Unzip is compatible with archives created by PKWARE(R)'s PKZIP for MS-DOS, but the programs' options and default behaviors do differ in some respects. Package: zlib Version: 1.2.5-1.ofns.pp Depends: libc.so.6()(64bit), libc.so.6(GLIBC_2.2.5)(64bit) Provides: libz.so.1()(64bit), libz.so.1(ZLIB_1.2.0)(64bit), libz.so.1(ZLIB_1.2.0.2)(64bit), libz.so.1(ZLIB_1.2.0.8)(64bit), libz.so.1(ZLIB_1.2.2)(64bit), libz.so.1(ZLIB_1.2.2.3)(64bit), libz.so.1(ZLIB_1.2.2.4)(64bit), libz.so.1(ZLIB_1.2.3.3)(64bit), libz.so.1(ZLIB_1.2.3.4)(64bit), libz.so.1(ZLIB_1.2.3.5)(64bit) Section: libs Architecture: x86_64 Maintainer: Peter Pramberger MD5Sum: 2e160e8ec1b983e0424e7cad38021f4b Size: 77452 Filename: zlib_1.2.5-1.ofns.pp_x86_64.ipk Source: http://www.zlib.net/zlib-1.2.5.tar.gz Description: The zlib compression and decompression library Zlib is a general-purpose, patent-free, lossless data compression library which is used by many different programs.